How to Paint a Pistol Slide

You’ve seen those beautiful custom paint jobs on pistols and wondered how to do it yourself. It’s not as difficult as you might think. In this article, we will show you how to paint a pistol slide with basic equipment and materials that you can find at your local hardware store.

The first thing you need to do is disassemble the pistol and remove the slide. Once the slide is removed, you will need to sand it down with 400-grit sandpaper until it is smooth. Next, you will need to clean the slide with denatured alcohol or another cleaner that will remove all oils and residue.

Once the slide is clean, you are ready to start painting.

  • Gather the necessary supplies including a can of spray paint, painter’s tape, and a drop cloth or old newspapers
  • Cover the area where you will be working with the drop cloth or newspapers
  • Tape off any areas of the pistol slide that you do not want to paint using the painter’s tape
  • Apply an even coat of spray paint to the exposed areas of the pistol slide
  • Allow the paint to dry according to the manufacturer’s instructions before proceeding
  • Remove the tape and check for any imperfections in your work
  • Touch up as necessary and allow the paint to dry completely before handling or reassembling your pistol
How to Paint a Pistol Slide

Credit: www.etsy.com

How Do I Paint My Pistol Slide

Assuming you would like tips on how to paint your gun slide: 1. Begin by taking the gun apart and removing the slide from the frame. If you are not comfortable doing this, take it to a professional gunsmith who can do it for you.

READ MORE:  How Does a Paint Booth Work


2. Once the slide is removed, clean it thoroughly with soap and water to remove any oils or dirt that could prevent the paint from adhering properly. You can also use acetone or another type of degreaser. 3. Next, sand the entire surface of the slide with fine-grit sandpaper until it is smooth.

Be sure to wear a dust mask to avoid inhaling any particles. 4. Once the surface is sanded, wipe it down with a damp cloth to remove any dust before painting. 5a).

If you are using an airbrush: Prime the surface with a light coat of primer, then apply 2-3 coats of your chosen color paint, allowing each coat to dry completely before applying the next one.. 5b).

If you are using spray paint: Apply 2-3 coats of primer, followed by 2-3 coats of your chosen color paint . Allow each coat to dry completely before applying the next one..

6). Finally, apply 1-2 coats of clear sealant over top to protect your new paint job!

How to Customize Your Pistol Slide for Under $50

Conclusion

This blog post provides a step-by-step guide on how to paint a pistol slide. The author first recommends disassembling the slide and removing all oil and grease before sanding it down. Next, the slide should be primed with a rust prevention primer before being painted with a high-quality enamel paint.

Once the paint has dried, the author recommends applying a clear coat to protect the finish.

Leave a Comment