How to Spray Paint Joycons

Assuming you have a pair of Joy-Cons that need a new paint job, the process is actually quite simple. You’ll need some spray paint, painters tape, and patience. First, disassemble the Joy-Cons completely.

This means taking off the back panels, detaching the buttons, and removing the joysticks. Next, use painters tape to mask off any areas you don’t want painted. Be sure to cover up electrical components and anywhere there’s exposed metal – you don’t want to short anything out!

Once everything is taped up, give the Joy-Cons a good cleaning with alcohol wipes to remove any oils or dirt that could interfere with the paint job. Now you’re ready to start painting! Apply light coats of spray paint, allowing each coat to dry completely before adding another.

After a few coats your Joy-Con should have an even coverage of color. Let them dry overnight before reassembling and enjoy your new custom controllers!

  • Gather your supplies
  • You will need a can of spray paint, Joycons, painters tape, and gloves
  • Place the Joycons on a piece of cardboard or newspaper
  • Use the painters tape to mask off any areas you don’t want painted
  • Put on your gloves and shake the can of spray paint for two minutes
  • Begin painting the Joycons with smooth, even strokes
  • Apply thin coats and allow each coat to dry for 30 minutes before applying the next one
  • Remove the painters tape and enjoy your newly painted Joycons!

How to Paint Joycons Without Taking Them Apart

Nintendo Switch Joy-Cons are some of the most versatile controllers on the market. They can be used as traditional controllers for games like Super Smash Bros. or as motion controllers for games like Splatoon 2. But one thing they can’t do is change colors…unless you’re willing to put in a little bit of work, that is!

If you want to add a splash of color to your Joy-Cons without taking them apart, there’s an easy way to do it. All you need is some paint and patience! Here’s what you’ll need:

-Acrylic paint in the colors of your choice (we recommend using two or three colors) -Paintbrush (preferably one with a fine tip) -Paper towels or old rag

-Isopropyl alcohol (rubbing alcohol) – this will be used for cleaning purposes only! -Optional: clear sealant/varnish (this will help protect the paint job) Now let’s get started!

1. Begin by thoroughly cleaning your Joy-Con with rubbing alcohol and a paper towel or old rag. This will remove any dirt, oil, or residue that could prevent the paint from properly adhering. Allow the Joy-Con to dry completely before moving on to the next step.

READ MORE:  Why is My Paint Sprayer Spitting

Custom Joycons

Nintendo Switch Joy-Cons are one of the coolest features of the console, and now you can get even more customization options with custom Joy-Cons from ColorWare. You can now choose from over 25 different colors and patterns for your left and right Joy-Con, including some licensed Nintendo themes like Zelda and Mario. The best part is that each Joy-Con is still fully functional, meaning you can use all the features and functions without any problems.

If you’re looking to add a little more personality to your Nintendo Switch, then custom Joy-Cons are definitely the way to go. With so many different colors and patterns to choose from, you’re sure to find something that fits your style perfectly. And since they’re still fully functional, you won’t have to worry about sacrificing any features or functionality.

So if you’re looking for a way to make your Nintendo Switch even more unique, be sure to check out custom Joy-Cons from ColorWare!

Painted Joycons

Painted Joycons are a popular mod for the Nintendo Switch console. They are created by painting the Joycon controllers to give them a unique and vibrant look. There are many different ways to paint Joycons, and the results can be stunning.

Some people use airbrush techniques, while others hand-paint their controllers. You can even find companies that will professionally paint your Joycons for you. Whether you DIY or have someone else do it for you, painted Joycons are a great way to add some personality to your Nintendo Switch console.

Pink Joycons

Nintendo’s Switch console is available in many different colors, but one of the most popular is the pink Joy-Con set. This colorful option was first released in Japan back in 2018, and it quickly became a hit with fans around the world. The pink Joy-Cons are perfect for those who want to add a little bit of personality to their gaming setup.

If you’re looking for a fun way to spice up your Nintendo Switch, then you should definitely consider picking up a pair of pink Joy-Cons. They’re sure to make your gaming sessions even more enjoyable.

How to Paint a Nintendo Switch Controller

One of the great things about the Nintendo Switch is that it’s a very versatile console. Not only can you play it at home on your TV, but you can also take it with you on the go and play it in portable mode. And if you want to really customize your gaming experience, you can even paint your Switch controller!

Here’s how:

READ MORE:  How to Extract Paint from a Spray Can
What You’ll Need: -Nintendo Switch controller

-Acrylic paint (in the color or colors of your choice) -Paintbrush -Clear sealant (optional)

How to Paint a Nintendo Switch Lite

Nintendo Switch Lite is a great handheld device for gaming on the go. If you’re looking to personalize your Switch Lite, one way to do so is by painting it. In this blog post, we’ll show you how to paint your Nintendo Switch Lite and give it a unique look!

First, you’ll need to gather some supplies. You’ll need a can of spray paint, painters tape, and newspapers or a drop cloth. Make sure to use a light color spray paint so that the buttons and screen are visible.

Now that you have your supplies, it’s time to get started! Begin by taping off any areas that you don’t want painted, such as the screen and buttons. Next, lay down your newspapers or drop cloth in a well-ventilated area.

Shake up your can of spray paint and begin painting your Switch Lite! Be sure to use even strokes and hold the can about 12 inches away from the surface while you’re painting. After you’ve finished painting, let your Nintendo Switch Lite dry for 24 hours before using it again.

And that’s it! You now have a one-of-a-kind Nintendo Switch Lite that shows off your personality perfectly!

How to Spray Paint Joycons


Can I Spray Paint My Switch?

No, you cannot spray paint your Switch. The Switch is made of plastic and metal, and paint would not adhere well to either of these materials. In addition, the paint would likely get into the buttons and joystick, which would ruin the function of the Switch.

How Do I Change My Joy-Con Color?

There are a few different ways that you can change the color of your Joy-Con controllers. The first way is to simply buy new Joy-Con controllers that are a different color than your current ones. You can find Joy-Con controllers in a variety of colors online or at most video game retailers.

If you don’t want to spend the money on new controllers, there is a way to change the color of your existing Joy-Con controllers using some special stickers. These stickers are designed specifically for changing the color of your Joy-Cons and come in a variety of colors. You can find them online or at most video game retailers.

Applying these stickers is relatively simple, but there are a few things you need to be aware of before you start. First, make sure that your Joy-Cons are clean and free of any dirt or grime. This will ensure that the stickers adhere properly.

Second, take your time when applying the sticker so that it is applied evenly and without any bubbles. Once the sticker is applied, you should be good to go!

READ MORE:  How Old to Buy Spray Paint

Can I Paint My Nintendo Switch With Acrylic Paint?

If you’re looking to add a personal touch to your Nintendo Switch, you might be wondering if you can paint it with acrylic paint. The short answer is yes, but there are a few things you need to keep in mind before you start painting. For starters, it’s important to use a light coat of paint and build up the layers gradually.

This will help prevent any paint from pooling in the creases of the console and ruining the finish. You’ll also want to make sure that the paint is completely dry before applying another layer or else the colors could run together. It’s also important to use acrylic paints specifically designed for plastic surfaces.

These paints will adhere better to the material and won’t chip or peel over time. Regular acrylic paints can still be used, but they may not have the same longevity as paints made specifically for plastic. Once you’ve prepped your materials and painted your Switch, be sure to let it dry completely before reassembling everything and putting games back in the cartridge slot.

With a little patience and care, you can easily give your Switch a one-of-a-kind look that shows off your personality!

How Do I Customize My Switch Joy-Con?

You can customize your Switch Joy-Con in a few different ways. One way is to change the color of the Joy-Con straps. To do this, simply remove the strap from the Joy-Con, and then insert the new strap into the slot.

Another way to customize your Joy-Con is to change the skin. Skins are thin pieces of vinyl that you can apply to the outside of your Joy-Con. There are many different designs available, so you can find one that fits your style.

Finally, you can also buy custom buttons for your Joy-Con. These buttons replace the standard A/B/X/Y buttons and can be found in a variety of colors and designs.

Spray Painting My Joycons


Spray painting your Joycons is a great way to add some personalization to your Nintendo Switch. The process is relatively simple and only requires a few materials. First, you’ll need to remove the Joycons from the Switch console.

Next, sand down the surface of the Joycons to create a smooth surface for painting. Once the sanding is complete, apply a primer coat before spraying on your desired color. Allow the paint to dry completely before reassembling your Switch.

Leave a Comment